Victron

Victron SmartSolar MPPT 100/20 Charge Controller

$225.99 AUD

~~$280.29 AUD~~ $225.99 AUD

Sale Sold out

Shipping calculated at checkout.

Product variants

Quantity

Victron SmartSolar MPPT 100/30 Charge Controller

Description

Victron SmartSolar MPPT 100/30 Solar panel charge controller for 12, and 24 battery systems (including Lithium Metal Batteries) with Bluetooth.

MPPT controllers operate solar panels at their Maximum Power Point, improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.

For further details please check the Description and Specifications Below.

View full details

Further Information

Detailed Description

Victron SmartSolar MPPT 100/20 Charge Controller

Description

Victron SmartSolar 100 VOC, 20 Amp MPPT solar panel charge controller for 12, 24 and 48-volt battery systems (including Lithium) with Bluetooth.

MPPT controllers operate solar panels at their Maximum Power Point, improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.

The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current - maximum power point.

Load output will prevent the battery from becoming totally flat [which can cause damage]. A preset discharge level can be configured at which point the SmartSolar will disconnect the load preventing the battery draining further.

Alternatively, the inbuilt intelligent battery management feature in the SmartSolar can be set. Known as Battery Life the feature is designed to protect and better maintain your battery by ensuring 100% recharge is regularly reached. SmartSolar attempts a daily 100% recharge. During periods of poor weather or low light conditions, it raises the disconnect voltage until successful.

Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:

Solar Gauge – Realtime power output
Battery Voltage
Battery Current
Battery State
Load Output [100/20 and smaller]
Load current – shows the current being drawn by appliances
History Analysis
Various Settings

How to Understand Different Victron MPPT model numbers

Example: “MPPT 75/50”, the first number (in this example 75) is the maximum PV open circuit voltage. The second number, 50, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations.

For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT? Key Features

Package Includes

Specifications

Specifications

SmartSolar Charge Controller	MPPT 75/10	MPPT 75/15		MPPT 100/15	MPPT 100/20-48V
Battery voltage (auto select)	12/24V				12/24/48V
Rated charge current	10A	15A		15A	20A
Nominal PV power, 12V 1a,b)	145W	220W		220W	290W
Nominal PV power, 12V 1a,b)	145W	220W		220W	290W
Nominal PV power, 24V 1a,b)	290W	440W		440W	580W
Nominal PV power, 48V 1a,b)	n. a.	n. a.		n. a.	1160W
Max. PV short circuit current 2)	13A	15A		15A	20A
Automatic load disconnect	Yes
Max. PV open circuit voltage	75V			100V
Peak efficiency	98%
Self-consumption – load on	12V: 19 mA		24V: 16 mA		26 / 20 / 19 mA
Self-consumption – load off	12V: 10 mA		24V: 8 mA		10 / 8 / 7 mA
Charge voltage 'absorption'	14,4V / 28,8V (adjustable)				14,4V / 28,8V / 57,6V (adj.)
Charge voltage 'float'	13,8V / 27,6V (adjustable)				13,8V / 27,6V / 55,2V (adj.)
Charge algorithm	multi-stage adaptive
Charge algorithm	multi-stage adaptive
Temperature compensation	-16 mV / °C resp. -32 mV / °C
Max. continuous load current	15A				20A / 20A / 1A
Low voltage load disconnect	11,1V / 22,2V / 44,4V or 11,8V / 23,6V / 47,2V or Battery Life algorithm
Low voltage load reconnect	13,1V / 26,2V / 52,4V or 14V / 28V / 56V or Battery Life algorithm
Protection	Output short circuit / Over temperature
Operating temperature	-30 to +60°C (full rated output up to 40°C)
Humidity	95%, non-condensing
Data communication port	VE.Direct (see the data communication white paper on our website)
ENCLOSURE
Colour	Blue (RAL 5012)
Power terminals	6 mm² / AWG10
Protection category	IP43 (electronic components), IP22 (connection area)
Weight	0,5 kg			0,6 kg	0,65 kg
Dimensions (h x w x d)	100 x 113 x 40 mm			100 x 113 x 50 mm	100 x 113 x 60 mm
STANDARDS
Safety	EN/IEC 62109-1, UL 1741, CSA C22.2
1a) If more PV power is connected, the controller will limit input power. 1b) The PV voltage must exceed Vbat + 5V for the controller to start. Thereafter the minimum PV voltage is Vbat + 1V 2) A PV array with a higher short circuit current may damage the controller.

Warranty

This product is covered by the manufacturers warranty of 5 years.

Shipping

Free Shipping on all Orders over $500 excluding kits, batteries, solar panels, batteries in kits.

Product Type	Shipping Cost
Products Under $500	$25
Victron Batteries (Lithium and AGM)	$150
Any Solar Panels	$85
Spend over $100 excluding Solar, Batteries	$23
Spend under $100 excluding Solar, Batteries	$25
Remote Areas	TBC
New Zealand, Asia Pacific	Please contact us.

Staying Simple will post all orders within 1- 4 business day of placing the order, you will be contacted within the same time frame if any product ordered is unavailable. Staying Simple do not hold all items in stock, so there may be delays in orders being dispatched from suppliers distribution centers.

AVAILABILITY

Currently our listed stock is all ready to ship, this can change regularly. All our stock comes direct from the manufactures distribution warehouse and stock levels can vary, If you would like to know if a particular item is in stock and estimated delivery times please contact us info@stayingsimple.com

RETURNS POLICY

We accept returns on the product/s offering a refund, credit or replacement

• When the product is faulty,

• If the product is wrongly described,

• If the product is found to differ from a sample/example shown to you,

• If the product does not do what it’s supposed to do.

Please contact us via email to info@stayindsimple.com to arrange a return.

Returns are discussed per case but please note that it is completely up to Staying Simple's discretion, please email us on admin@stayingsimple.com if you have any queries on our shipping policy.

SHIPPING